cylinder-sub-assy-500x200.jpg
Coil-Spring-Assy-01-500x200.jpg
Piston-Load-Case-B01-500x200.jpg
Piston-3D-500x200.jpg
Valve-3D-500x200.jpg
Wheels-and-rod-bearings.jpg
Frame-assembly-500x200.jpg
Coil-Spring-Assy-01-500x200.jpg
Piston-Load-Case-B01-500x200.jpg
Piston-3D-500x200.jpg
Valve-3D-500x200.jpg
Wheels-and-rod-bearings.jpg
Frame-assembly-500x200.jpg
This section concentrates on the Engineering aspects of the 5AT, focussing on the Fundamental Design Calculations, the Detailed Design and the Engineering Drawings.
Other aspects of the engineering related to the Project are covered in other sections of this website. Particular attention is drawn to the following pages under the The Locomotive Menu Heading:
Note: Wardale's own observations about the design of the 5AT can be read in his paper written for the Modern Steam conference held at York in December 2006.

